NATO Stock Number
3405-00-409-0063
Sold in multiples of
DEMIL
NO
Mounting Type
Floor
Current Type
Ac
Frequency Rating
60.0 hertz
Accessory Components And Quantity
Fence, rip, 18 in., 1; belt attachment, sanding abrasive, 1; welder and grinder, butt, 1; lamp attachment, 1; sliding, straight and angle cut-off, 1; lamp attachment, sliding jig, 1; spare drive belt set, 1; blade, skip tooth, 100 ft.Coil, aluminum and plastic cutting, 1; raker set, flexible back, conventional tooth, 1/2 in.Wide, 14 tooth, 100 ft.Coil, 1; blade, 1/2 in.Wide, 24 tooth, pipe and channel cutting, 100 ft.Coil, 1; belt, sanding, coarse grit, 3; belt, sanding, medium grit, 3
Frame Type
Rigid
Voltage Rating
115.0 volts
Rotational Speed Rating In Rpm
1725.0
Horsepower Rating
0.750
Throat Depth
13.750 inches
Braking Facility
Not included
Drive Method
Electric motor
Table Length
14.000 inches
Table Width
14.000 inches
Electric Motor Quantity
1
Table Type
Tilting
Table Right Tilt Angle In Deg
45.0
Table Left Tilt Angle In Deg
10.0
Band Type For Which Designed
Saw blade
Blade Maximum Length Accommodated
94.000 inches
Blade Maximum Width Accommodated
0.750 inches
Vise
Not provided
Distance Between Guide And Table
6.250 inches
Cutting Speed Range
+40.0/+3000.0 feet per minute
Cutting Speed Quantity
8
Power Feed Feature
Not provided
Built-in Coolant System
Not included
Integral Butt Welder
Not included
Integral Grinder
Not included
Phase
Single
Reference Number Differentiating Characteristics
As differentiated by the drive method, electric motor requirements and accessory components requirement