NSN 2817045

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.312 inches nominal body length, unable to decode frequency rating, unable to decode distance between mounting facility centers, 1.312 inches nominal body width, 1.562 inches nominal body height.

NSN 5950-00-406-0286 Datasheet

(NSN) National Stock Number

5950-00-406-0286

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-406-0286

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Wed, Apr 14, 1971

Body Height

1.562 inches nominal

Body Length

1.312 inches nominal

Body Width

1.312 inches nominal

Distance Between Mounting Facility Centers

unable to decode

Frequency Rating

unable to decode

Inclosure Type

partially inclosed, double shell

Input-Output Phase Relationship

unable to decode

Maximum Operating Temp

130.0 celsius

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

unable to decode

Mounting Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

11 tab, solder lug

Test Data Document

10001-2817045 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Winding Function And Quantity

Winding Operating Current

unable to decode

Winding Operating Voltage

unable to decode

Winding Shielding Method

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

72149

Electronic Transformer Corp Div Electronic Transformer Corporation

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-406-0286?

   The FSCG of the NSN 5950-00-406-0286 is 5950

2. Does NSN 5950-00-406-0286 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-00-406-0286 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5950-00-406-0286 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-406-0286 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Wed, Apr 14, 1971