NSN 283-0342-00

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.220 inches minimum and 0.280 inches maximum center to center distance between terminals parallel to diameter, 6.500 picofarads single section capacitance value per section, 0.390 inches maximum body diameter, w/o mtg facilities, radial terminals body style, 0.187 inches maximum body length.

NSN 5910-01-005-9610 Datasheet

(NSN) National Stock Number

5910-01-005-9610

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-005-9610

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Sun, Jul 13, 1975

Schedule B Code

8532290040

Body Diameter

0.390 inches maximum

Body Length

0.187 inches maximum

Body Style

w/o mtg facilities, radial terminals

Capacitance Value Per Section

6.500 picofarads single section

Center To Center Distance Between Terminals Parallel To Diameter

0.220 inches minimum and 0.280 inches maximum

Insulation Resistance At Reference Temp

50000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

2000.0 dc single section

Quality Factor At Reference Temp

1000.0000

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Diameter

0.025 inches minimum and 0.027 inches maximum

Terminal Length

1.500 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-60.0 to 60.0 single section

Tolerance Range Per Section

-0.50 to 0.50 picofarads single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

80009

Tektronix, Inc.

U.s./canadian manufacturers

60705

Cera-Mite Corp

U.s./canadian manufacturers

59660

Tusonix, Llc

U.s./canadian manufacturers

72982

Erie Specialty Products Inc

U.s./canadian manufacturers

91418

Radio Materials Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-005-9610?

   The FSCG of the NSN 5910-01-005-9610 is 5910

2. Does the NSN 5910-01-005-9610 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-005-9610 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-005-9610 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-005-9610 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-005-9610 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Sun, Jul 13, 1975