NSN 2844632-1

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

3.245 inches minimum and 3.255 inches maximum aperture width, 14 bolt hole quantity, 2.871 inches minimum and 2.881 inches maximum center to center distance between bolt holes along width, 13.525 inches minimum and 13.535 inches maximum aperture length, 2.323 inches minimum and 2.333 inches maximum center to center distance between bolt holes along length.

NSN 5999-01-280-2185 Datasheet

(NSN) National Stock Number

5999-01-280-2185

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5999 - Miscellaneous Electrical and Electronic Components

(NIIN) National Item Identification Number

01-280-2185

Requires Demilitarization

Yes

(INC) Item Name Code

20281

Date

Fri, Jun 3, 1988

Schedule B Code

8543909000

Aperture Length

13.525 inches minimum and 13.535 inches maximum

Aperture Width

3.245 inches minimum and 3.255 inches maximum

Bolt Hole Quantity

14

Center To Center Distance Between Bolt Holes Along Length

2.323 inches minimum and 2.333 inches maximum

Center To Center Distance Between Bolt Holes Along Width

2.871 inches minimum and 2.881 inches maximum

Cross-Sectional Height

0.016 inches minimum and 0.024 inches maximum

Cross-Sectional Shape Style

linked wire and composition

Environmental Protection Material Location

throughout rf shielding gasket

Hole Diameter

0.156 inches minimum and 0.166 inches maximum

Inside Corner Radius

0.250 inches nominal

Material Document And Classification

unable to decode

Material

unable to decode

Outside Corner Bevel Length Along Length

0.151 inches minimum and 0.161 inches maximum

Outside Corner Bevel Length Along Width

0.151 inches minimum and 0.161 inches maximum

Overall Length

14.525 inches minimum and 14.535 inches maximum

Overall Width

4.245 inches minimum and 4.255 inches maximum

Style Designator

non-circular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020281

Cross Reference

CAGE Codes

18565

Parker-Hannifin Corporation Dba Pneutronics Div Chomerics Division

U.s./canadian manufacturers

52088

Lockheed Martin Corporation Div Rms - Manassas

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35070

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

062800

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5999-01-280-2185?

   The FSCG of the NSN 5999-01-280-2185 is 5999

2. Does the NSN 5999-01-280-2185 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5999-01-280-2185 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5999-01-280-2185 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5999-01-280-2185 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5999-01-280-2185 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Fri, Jun 3, 1988