NSN 28F5302FA

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

3.060 inches minimum and 3.180 inches maximum body height, 1.280 inches minimum and 1.340 inches maximum body width, 2.130 inches minimum and 2.190 inches maximum body length, w/o mtg facilities, terminal(s) on one surface body style, freq converter 5kva end item identification.

NSN 5910-01-155-2012 Datasheet

(NSN) National Stock Number

5910-01-155-2012

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-155-2012

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Mon, Jun 6, 1983

Schedule B Code

8532250080

End Item Identification

freq converter 5kva

Body Height

3.060 inches minimum and 3.180 inches maximum

Body Length

2.130 inches minimum and 2.190 inches maximum

Body Style

w/o mtg facilities, terminal(s) on one surface

Body Width

1.280 inches minimum and 1.340 inches maximum

Capacitance Value Per Section

5.000 microfarads single section

Material

paper case

Nonderated Operating Temp

-30.0 celsius minimum and 80.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 ac-peak single section

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.520 inches nominal

Terminal Type And Quantity

2 tab, solder lug

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

12175

Unitron Inc

U.s./canadian manufacturers

3BC99

Unitron, Lp Dba Unitron Power Systems, Lp ; Atlas Marine Systems

U.s./canadian manufacturers

30003

Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier

Government departments or units, including military organizations

01002

General Electric Co Capacitors Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-155-2012?

   The FSCG of the NSN 5910-01-155-2012 is 5910

2. Does the NSN 5910-01-155-2012 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-01-155-2012 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-155-2012 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-155-2012 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-155-2012 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Mon, Jun 6, 1983