NSN 2903DB

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

round, terminal/terminals in opposite surface body style, -0.30 to 0.30 attenuation accuracy in decibels, transmission line application design, sma coaxial connector series designation, 18.0 gigahertz attenuation accuracy reference frequency.

NSN 5985-01-175-1870 Datasheet

(NSN) National Stock Number

5985-01-175-1870

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-175-1870

Requires Demilitarization

Yes

(INC) Item Name Code

14224

Date

Tue, Mar 27, 1984

Schedule B Code

8529109000

Application Design

transmission line

Attenuation Accuracy In Decibels

-0.30 to 0.30

Attenuation Accuracy Reference Frequency

18.0 gigahertz

Body Style

round, terminal/terminals in opposite surface

Coaxial Connector Series Designation

sma

Connection Type Per Function

female output and male input

Frequency Range

0.000 hertz minimum and 18.000 gigahertz maximum

Fsc Application Data

antennas,waveguides,and related equipment

Input Impedance Rating In Ohms

50.0

Material

unable to decode

Mounting Method

connector

Operating Temp Range

+0.0 to 85.0 celsius

Output Impedance Rating In Ohms

50.0

Overall Diameter

0.360 inches maximum

Overall Length

0.860 inches nominal

Power Rating

2.0 watts average and 0.2 kilowatts peak

Rf Signal Attenuation In Decibels

3.0

Temperature Sensitivity Attenuation In Decibels

0.0010

Terminal Type And Quantity

2 connector

Unpackaged Unit Weight

0.500 ounces

Voltage Standing Wave Ratio

1.15 and 1.30 and 1.35

Voltage Standing Wave Ratio Frequency Range

+0.0 to 4.0 gigahertz and +4.0 to 12.4 gigahertz and +12.4 to 18.0 gigahertz

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0014224

Cross Reference

CAGE Codes

09992

Antenna & Radome Research Associates Corp Dba Arra Inc Div Arra Inc

U.s./canadian manufacturers

64537

Caes Systems Llc

U.s./canadian manufacturers

91417

L3harris Technologies, Inc.

U.s./canadian manufacturers

81413

Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems

U.s./canadian manufacturers

34078

Cinch Connectivity Solutions Inc

U.s./canadian manufacturers

14482

Watkins-Johnson Co

U.s./canadian manufacturers

8P525

Watkins Johnson Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

06330

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

060535

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-175-1870?

   The FSCG of the NSN 5985-01-175-1870 is 5985

2. Does the NSN 5985-01-175-1870 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-175-1870 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-01-175-1870 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-175-1870 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-175-1870 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Tue, Mar 27, 1984