NSN 2906DB

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

sma coaxial connector series designation, 0.000 hertz minimum and 18.000 gigahertz maximum frequency range, round, terminal/terminals in opposite surface body style, transmission line application design, -0.03 to 0.03 attenuation accuracy in decibels.

NSN 5985-01-216-2314 Datasheet

(NSN) National Stock Number

5985-01-216-2314

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-216-2314

Requires Demilitarization

Yes

(INC) Item Name Code

14224

Date

Sat, Sep 7, 1985

Schedule B Code

8529109000

Application Design

transmission line

Attenuation Accuracy In Decibels

-0.03 to 0.03

Body Style

round, terminal/terminals in opposite surface

Coaxial Connector Series Designation

sma

Frequency Range

0.000 hertz minimum and 18.000 gigahertz maximum

Input Impedance Rating In Ohms

50.0

Material

unable to decode

Mounting Method

connector

Operating Temp Range

-65.0 to 125.0 celsius

Output Impedance Rating In Ohms

50.0

Overall Diameter

0.280 inches nominal

Overall Length

0.860 inches nominal

Power Rating

2.0 watts average

Rf Signal Attenuation In Decibels

6.0

Surface Treatment

unable to decode

Terminal Type And Quantity

2 connector

Voltage Standing Wave Ratio Frequency Range

+0.0 to 18.0 gigahertz

Voltage Standing Wave Ratio

1.07

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0014224

Cross Reference

CAGE Codes

64671

Spectrum Control, Inc.

U.s./canadian manufacturers

96341

Cobham Advanced Electronic Solutions Inc.

U.s./canadian manufacturers

DG438

Semic Rf Electronic Gmbh

Non-manufacturers

06401

L3 Technologies, Inc. Dba Communication Systems-West Div Communication Systems-West

U.s./canadian manufacturers

34078

Cinch Connectivity Solutions Inc

U.s./canadian manufacturers

H0203

Thales Nederland

Non-us manufacturer (nato), other foreign organization or codification bureaus

D1901

Hensoldt Sensors Gmbh Div Seps

Non-us manufacturer (nato), other foreign organization or codification bureaus

K0662

Leonardo Mw Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

U6682

Leonardo Uk Ltd

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

06330

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

060535

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-216-2314?

   The FSCG of the NSN 5985-01-216-2314 is 5985

2. Does the NSN 5985-01-216-2314 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-216-2314 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5985-01-216-2314 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-216-2314 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-216-2314 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Sat, Sep 7, 1985