NSN 292-3DB

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

-0.30 to 0.30 attenuation accuracy in decibels, transmission line application design, sma coaxial connector series designation, 8.0 gigahertz attenuation accuracy reference frequency, round, terminal/terminals in opposite surface body style.

NSN 5985-01-264-8970 Datasheet

(NSN) National Stock Number

5985-01-264-8970

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-264-8970

Requires Demilitarization

Yes

(INC) Item Name Code

14224

Date

Wed, Oct 7, 1987

Schedule B Code

8529109000

Application Design

transmission line

Attenuation Accuracy In Decibels

-0.30 to 0.30

Attenuation Accuracy Reference Frequency

8.0 gigahertz

Body Style

round, terminal/terminals in opposite surface

Coaxial Connector Series Designation

sma

Connection Type Per Function

female input and male output

Frequency Range

0.000 hertz minimum and 12.400 gigahertz maximum

Fsc Application Data

antennas,waveguides,and related equipment

Input Impedance Rating In Ohms

50.0

Material

unable to decode

Mounting Method

connector

Operating Temp Range

-65.0 to 125.0 celsius

Output Impedance Rating In Ohms

50.0

Overall Diameter

0.312 inches nominal

Overall Length

0.860 inches nominal

Power Rating

2.0 watts average and 100.0 watts peak

Rf Signal Attenuation In Decibels

3.0

Surface Treatment

unable to decode

Terminal Type And Quantity

2 connector

Unpackaged Unit Weight

5.0 grams

Voltage Standing Wave Ratio

1.15 and 1.25

Voltage Standing Wave Ratio Frequency Range

+0.0 to 4.0 gigahertz and +4.0 to 12.4 gigahertz

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0014224

Cross Reference

CAGE Codes

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

96341

Cobham Advanced Electronic Solutions Inc.

U.s./canadian manufacturers

DG438

Semic Rf Electronic Gmbh

Non-manufacturers

30003

Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier

Government departments or units, including military organizations

34078

Cinch Connectivity Solutions Inc

U.s./canadian manufacturers

00752

L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products

U.s./canadian manufacturers

13993

Bae Systems Space & Mission Systems Inc. Div Space & Mission Systems Inc.

U.s./canadian manufacturers

64694

Telephonics Corporation

U.s./canadian manufacturers

64671

Spectrum Control, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

06330

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

060535

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-264-8970?

   The FSCG of the NSN 5985-01-264-8970 is 5985

2. Does the NSN 5985-01-264-8970 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-264-8970 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5985-01-264-8970 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-264-8970 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-264-8970 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Wed, Oct 7, 1987