NSN 2994426

An item consisting of an electrically conductive material designed to furnish a surface which will physically and electrically meet another conducting surface for the purpose of transferring electrical energy and/or opening and closing circuits. Includes moving contacts which make and/or slide over stationary contacts or other stationary conductive material to a resulting fixed position. Excludes:items which are used in conjunction with continually moving surfaces or which make contact by gripping action of the contact surfaces. See also clip, electrical; clamp, electrical; brush, electrical contact; plug, tip; and jack, tip.

1.062 inches maximum body length, plain foil anode type, 0.328 inches maximum body diameter, 0.600 microfarads single section capacitance value per section, w/o mtg facilities, axial terminals body style.

NSN 5910-00-933-9682 Datasheet

(NSN) National Stock Number

5910-00-933-9682

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-933-9682

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Mon, Oct 24, 1966

Schedule B Code

8532290040

Anode Type

plain foil

Body Diameter

0.328 inches maximum

Body Length

1.062 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.600 microfarads single section

Capacitive Electrode Material

tantalum

Case Insulation Material

plastic

Dc Leakage At Reference Temp

20.000 microamperes

Electrical Polarization

polarized

Features Provided

hermetically sealed case

Impedance At Minimum Operating Temp In Ohms

5350.0

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

450.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Terminal Diameter

0.025 inches nominal

Terminal Length

1.500 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

99971-7618370+60 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Tolerance Range Per Section

-15.00 to 15.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

56699

Bc Components

U.s./canadian manufacturers

03508

General Electric Co Semi-Conductor Products Dept

U.s./canadian manufacturers

99971

Lockheed Martin Corp Naval Electronics & Surveillance Systems

U.s./canadian manufacturers

05079

Vishay Sprague, Inc. Dba Vishay Sprague Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-933-9682?

   The FSCG of the NSN 5910-00-933-9682 is 5910

2. Does the NSN 5910-00-933-9682 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-933-9682 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-933-9682 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-933-9682 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-933-9682 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Mon, Oct 24, 1966