NSN 29F1060

A coil or coils usually constructed with cores having low magnetic reluctance, whose primary purpose is to furnish an inductive impedance in power or audio frequency circuit ranging from zero to 20 kilohertz (kilocycles). Includes audio frequency and power filter chokes, audio reactors and swinging chokes. Does not include transformers or coils used above audio frequency range. Excludes:saturable reactor. For reactors with air cores, see coil (as modified).

w/o mtg facilities, terminal(s) on one surface body style, 1.378 inches maximum body length, 2.500 inches nominal body height, 0.783 inches nominal body width, etched foil anode type.

NSN 5910-00-402-4011 Datasheet

(NSN) National Stock Number

5910-00-402-4011

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-402-4011

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Fri, Apr 10, 1970

Schedule B Code

8532290040

Anode Type

etched foil

Body Height

2.500 inches nominal

Body Length

1.378 inches maximum

Body Style

w/o mtg facilities, terminal(s) on one surface

Body Width

0.783 inches nominal

Capacitive Electrode Material

tantalum

Capacitance Value Per Section

2100.000 microfarads single section

Dc Leakage At Maximum Operating Temp

1470.0 milliamperes

Dc Leakage At Reference Temp

147.000 microamperes

Electrical Polarization

nonpolarized

Features Provided

hermetically sealed case

Impedance At Minimum Operating Temp In Ohms

4.0

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

15.0 dc single section

Power Factor At Reference Temp In Percent

30.0000

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 tab, solder lug

Test Data Document

"81349-mil-c-3965/12 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-15.00 to 75.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

03538

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

56699

Bc Components

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-402-4011?

   The FSCG of the NSN 5910-00-402-4011 is 5910

2. Does the NSN 5910-00-402-4011 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-402-4011 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-402-4011 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-402-4011 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-402-4011 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, Apr 10, 1970