NSN 29KP569

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

5360-01-423-0845, flat spring.

NSN 5360-01-423-0845 Datasheet

(NSN) National Stock Number

5360-01-423-0845

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5360 - Coil, Flat, Leaf and Wire Springs

(NIIN) National Item Identification Number

01-423-0845

Requires Demilitarization

Yes

(INC) Item Name Code

61782

Date

Thu, Dec 14, 1995

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0061782

Cross Reference

CAGE Codes

09990

Parker-Hannifin Corporation Dba Pneutronics Div Hydraulic Valve Division

U.s./canadian manufacturers

45152

Oshkosh Corp

U.s./canadian manufacturers

75Q65

Oshkosh Defense Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

87470

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

178020

Questions & Answers

1. What is the FSCG of the NSN 5360-01-423-0845?

   The FSCG of the NSN 5360-01-423-0845 is 5360

2. Does NSN 5360-01-423-0845 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5360-01-423-0845 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5360-01-423-0845 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5360-01-423-0845 was assigned to the Federal Catalog?

   It was assigned 30 years ago, on Thu, Dec 14, 1995