NSN 2B1B126

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1 coil quantity, unable to decode center to center distance between mounting facilities parallel to length, 30.0 dc main contact maximum voltage rating in volts, unable to decode main contact load current rating at maximum rated voltage, continuous duty type.

NSN 5945-00-081-8553 Datasheet

(NSN) National Stock Number

5945-00-081-8553

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

00-081-8553

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Mon, Dec 11, 1967

Schedule B Code

8536410020

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Coil Quantity

1

Duty Type

continuous

Main Contact Load Current Rating At Maximum Rated Voltage

unable to decode

Main Contact Maximum Voltage Rating In Volts

30.0 dc

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

2 unthreaded hole(s) single mounting facility

Nonpile-Up Main Contact Arrangement

2 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

0.430 inches nominal

Overall Length

1.310 inches nominal

Overall Width

1.060 inches nominal

Terminal Type And Quantity

unable to decode

Unthreaded Mounting Hole Diameter

unable to decode

Winding Dc Resistance Rating

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

02289

Hi-G Co Inc Sub of Nytronics Inc

U.s./canadian manufacturers

02889

Brake Manufacturers Inc

U.s./canadian manufacturers

00779

Te Connectivity Corporation

U.s./canadian manufacturers

58614

Te Connectivity Corporation

U.s./canadian manufacturers

K0233

Thales Uk Limited Dba Thales Uk Ltd Optronics

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-41-0020

Description

relays, electromechanical, with contacts rated less than 10 a, for a voltage not exceeding 60 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-00-081-8553?

   The FSCG of the NSN 5945-00-081-8553 is 5945

2. Does the NSN 5945-00-081-8553 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536410020

3. Does NSN 5945-00-081-8553 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-00-081-8553 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-00-081-8553 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-00-081-8553 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Mon, Dec 11, 1967