NSN 2CC1B4

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

1.500 inches nominal body length, 1.438 inches nominal actuator length, 7.000 amperes resistive dc contact load current rating at maximum rated voltage, 0.500 inches nominal bushing length, 2.250 inches nominal body diameter.

NSN 5930-00-296-6706 Datasheet

(NSN) National Stock Number

5930-00-296-6706

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-296-6706

Requires Demilitarization

Yes

(INC) Item Name Code

00406

Date

Tue, Jan 1, 1963

Schedule B Code

8536509035

Actuator Length

1.438 inches nominal

Body Diameter

2.250 inches nominal

Body Length

1.500 inches nominal

Bushing Length

0.500 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

7.000 amperes resistive dc

Maximum Voltage Rating In Volts

24.0 dc

Nonpile-Up Contact Arrangement

unable to decode

Switch Actuator Quantity

1

Terminal Type And Quantity

2 screw

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000406

Cross Reference

CAGE Codes

24446

General Electric Company

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9035

Description

switches, push-button, rated at over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-296-6706?

   The FSCG of the NSN 5930-00-296-6706 is 5930

2. Does the NSN 5930-00-296-6706 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509035

3. Does NSN 5930-00-296-6706 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-296-6706 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-296-6706 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-296-6706 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963