NSN 2F9853

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.203 inches nominal first hole diameter, 0.328 inches nominal first hole spacing, 0.650 inches minimum and 0.665 inches maximum overall width, 0.650 inches minimum and 0.665 inches maximum overall length, 0.125 inches nominal overall height.

NSN 5970-00-363-1526 Datasheet

(NSN) National Stock Number

5970-00-363-1526

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5970 - Electrical Insulators and Insulating Materials

(NIIN) National Item Identification Number

00-363-1526

Requires Demilitarization

Yes

(INC) Item Name Code

18296

Date

Tue, Jan 1, 1963

Schedule B Code

8546900000

First Hole Spacing

0.328 inches nominal

First Hole Diameter

0.203 inches nominal

Overall Height

0.125 inches nominal

Overall Length

0.650 inches minimum and 0.665 inches maximum

Overall Width

0.650 inches minimum and 0.665 inches maximum

Second Hole Spacing

0.328 inches nominal

Style Designator

flat, rectangular

Material And Location

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9G - Defense supply center richmond, virginia 23297

Pseudo Item Name Code

0018296

Cross Reference

CAGE Codes

11083

Caterpillar Inc Div Caterpillar Defense

U.s./canadian manufacturers

45152

Oshkosh Corp

U.s./canadian manufacturers

75Q65

Oshkosh Defense Llc

U.s./canadian manufacturers

12204

Chrysler Realty Company Llc Dba Daimler Chrysler

U.s./canadian manufacturers

34623

Am General Llc

U.s./canadian manufacturers

23040

Ford Motor Co Ford Parts and Service Div Government Part Sales

U.s./canadian manufacturers

57526

Ford Motor Company

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

W - Rating variable

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

77803

Water Commodity

772 - Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc

National Motor Freight Classification Item Number

157320

Schedule B & Trade

Schedule B

8546-90-0000

Description

electrical insulators, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77324

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5970-00-363-1526?

   The FSCG of the NSN 5970-00-363-1526 is 5970

2. Does the NSN 5970-00-363-1526 have a Schedule B code assigned?

   Yes, the Schedule B code is 8546900000

3. Does NSN 5970-00-363-1526 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5970-00-363-1526 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5970-00-363-1526 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5970-00-363-1526 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963