NSN 2G754A

A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

5.0 amperes resistive load dc at sea level contact load current rating, breaks before makes single section rear contact switching action, loader,scoop 10988 end item identification, 3.0 amperes resistive load ac at sea level contact load current rating, 125.0 ac at sea level contact voltage rating in volts.

NSN 5930-01-087-9403 Datasheet

(NSN) National Stock Number

5930-01-087-9403

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-087-9403

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sun, Dec 30, 1979

Schedule B Code

8536509020

End Item Identification

loader,scoop 10988

Contact Load Current Rating

3.0 amperes resistive load ac at sea level

Contact Load Current Rating

5.0 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes single section rear

Contact Voltage Rating In Volts

125.0 ac at sea level

Contact Voltage Rating In Volts

30.0 dc at sea level

Detent Rotational Torque Range

+15.000 to 35.000 inch-ounces single actuator

First Flat Length

0.322 inches nominal single actuator

Flat Height

0.156 inches nominal single actuator

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

1

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.438 inches single mounting facility

Nonturn Device Type

flatted bushing at 3:00 oclock

Overall Height

1.150 inches nominal

Overall Length

1.857 inches nominal

Overall Width

1.060 inches nominal

Pole Quantity

1 single section rear

Shaft Diameter

0.249 inches nominal single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.355 inches nominal single actuator

Style Designator

tap, square frame

Switch Actuator Indexing Position Quantity

4 single actuator

Switch Actuator Momentary Position

clockwise single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.285 inches nominal single mounting facility

Thread Quantity Per Inch

28 single mounting facility

Thread Series Designator

uns single mounting facility

Throw Quantity

4 single section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

54840

Precision Cable Mfg Co Inc

U.s./canadian manufacturers

59534

Heavy Equipment Parts, Inc Dba Heavy Equipment Parts

Non-manufacturers

60668

K Electronics Inc. Dba Kelectronics Inc.

U.s./canadian manufacturers

89522

Indak Manufacturing Corp Dba Indak Manufacturing Corp

U.s./canadian manufacturers

10988

Cnh Industrial America Llc Dba Cnh America

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-087-9403?

   The FSCG of the NSN 5930-01-087-9403 is 5930

2. Does the NSN 5930-01-087-9403 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-087-9403 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-087-9403 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-087-9403 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-087-9403 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Sun, Dec 30, 1979