NSN 2KCC0A0000489

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

uninclosed inclosure type, 1.000 amperes resistive dc and 450.000 milliamperes resistive ac contact load current rating at maximum rated voltage, unable to decode nonpile-up contact arrangement, 115.0 ac and 28.0 dc maximum voltage rating in volts, 1.626 inches nominal overall height.

NSN 5930-00-236-8103 Datasheet

(NSN) National Stock Number

5930-00-236-8103

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-236-8103

Requires Demilitarization

Yes

(INC) Item Name Code

00406

Date

Wed, Dec 22, 1971

Schedule B Code

8536509035

Contact Load Current Rating At Maximum Rated Voltage

1.000 amperes resistive dc and 450.000 milliamperes resistive ac

Inclosure Type

uninclosed

Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Nonpile-Up Contact Arrangement

unable to decode

Overall Height

1.626 inches nominal

Overall Length

6.487 inches nominal

Switch Actuator Quantity

10

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000406

Cross Reference

CAGE Codes

80009

Tektronix, Inc.

U.s./canadian manufacturers

71590

Crl Components Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9035

Description

switches, push-button, rated at over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-236-8103?

   The FSCG of the NSN 5930-00-236-8103 is 5930

2. Does the NSN 5930-00-236-8103 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509035

3. Does NSN 5930-00-236-8103 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-236-8103 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-236-8103 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-236-8103 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, Dec 22, 1971