NSN 2N3285

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

collector electrode internally-electrically connected to case, 0.05 amperes maximum collector current, dc and 10.00 microamperes maximum collector cutoff current, dc, emitter open current rating per characteristic, terminal mounting method, to-72 joint electronic device engineering council/jedec/case outline designation, junction contact internal configuration.

NSN 5961-00-682-7347 Datasheet

(NSN) National Stock Number

5961-00-682-7347

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5961 - Semiconductor Devices and Associated Hardware

(NIIN) National Item Identification Number

00-682-7347

Requires Demilitarization

Yes

(INC) Item Name Code

20588

Date

Wed, Jan 31, 1968

Schedule B Code

8541500080

Current Rating Per Characteristic

0.05 amperes maximum collector current, dc and 10.00 microamperes maximum collector cutoff current, dc, emitter open

Electrode Internally-Electrically Connected To Case

collector

Internal Configuration

junction contact

Joint Electronic Device Engineering Council/Jedec/Case Outline Designation

to-72

Mounting Method

terminal

Overall Diameter

0.209 inches minimum and 0.230 inches maximum

Overall Length

0.170 inches minimum and 0.210 inches maximum

Power Rating Per Characteristic

100.0 milliwatts maximum collector power dissipation

Semiconductor Material

germanium

Special Features

junction pattern arrangement: pnp

Terminal Circle Diameter

0.100 inches nominal

Terminal Length

0.500 inches minimum

Terminal Type And Quantity

4 uninsulated wire lead

Transfer Ratio

5.0 nominal small-signal short-circuit forward current transfer ratio, common-emitter

Voltage Rating In Volts Per Characteristic

20.0 maximum breakdown voltage, collector-to-base, emitter open and 20.0 maximum breakdown voltage, collector-to-emitter, base open and 0.5 maximum breakdown voltage, emitter-to-base, collector open

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0020588

Cross Reference

CAGE Codes

04713

Freescale Semiconductor, Inc.

U.s./canadian manufacturers

14321

Pd&e Electronics, Llc

U.s./canadian manufacturers

30043

Solid State Devices, Inc

U.s./canadian manufacturers

31338

Semitronics Corp

U.s./canadian manufacturers

80131

Electronic Industries Association

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34525

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063025

Questions & Answers

1. What is the FSCG of the NSN 5961-00-682-7347?

   The FSCG of the NSN 5961-00-682-7347 is 5961

2. Does the NSN 5961-00-682-7347 have a Schedule B code assigned?

   Yes, the Schedule B code is 8541500080

3. Does NSN 5961-00-682-7347 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5961-00-682-7347 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5961-00-682-7347 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5961-00-682-7347 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Wed, Jan 31, 1968