NSN 2RDM20E332J0

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.590 inches maximum body width, 0.790 inches maximum body length, 0.320 inches maximum body height, w/o mtg facilities terminal(s) on one surface body style, 3300.000 picofarads single section capacitance value per section.

NSN 5910-00-478-4385 Datasheet

(NSN) National Stock Number

5910-00-478-4385

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-478-4385

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Mon, Jun 28, 1971

Schedule B Code

8532290020

Body Height

0.320 inches maximum

Body Length

0.790 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Body Width

0.590 inches maximum

Capacitance Value Per Section

3300.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.406 inches minimum and 0.468 inches maximum

Dissipation Factor At Reference Temp In Percent

0.0015

Insulation Resistance At Maximum Operating Temp

20000.0 megohms

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

1000.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Special Features

outside crimped leads

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

-20.0 to 100.0 single section

Terminal Length

1.000 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

72699

General Instrument Corp Corporate Headquarters

U.s./canadian manufacturers

06141

L3 Aviation Products, Inc. Dba L3 Technologies

U.s./canadian manufacturers

72136

Electro Motive Corp Subsidiary of International Electronics Corp

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-478-4385?

   The FSCG of the NSN 5910-00-478-4385 is 5910

2. Does the NSN 5910-00-478-4385 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-00-478-4385 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-478-4385 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-478-4385 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-478-4385 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Mon, Jun 28, 1971