NSN 2SD668A-C

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

150.0 celsius junction maximum operating temp per measurement point, plastic enclosure material, to-126 joint electronic device engineering council/jedec/case outline designation, junction contact internal configuration, 100.00 milliamperes maximum collector current, dc current rating per characteristic.

NSN 5961-01-214-7045 Datasheet

(NSN) National Stock Number

5961-01-214-7045

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5961 - Semiconductor Devices and Associated Hardware

(NIIN) National Item Identification Number

01-214-7045

Requires Demilitarization

Yes

(INC) Item Name Code

20588

Date

Thu, Aug 15, 1985

Schedule B Code

8541500080

Current Rating Per Characteristic

100.00 milliamperes maximum collector current, dc

Internal Configuration

junction contact

Joint Electronic Device Engineering Council/Jedec/Case Outline Designation

to-126

Material

plastic enclosure

Maximum Operating Temp Per Measurement Point

150.0 celsius junction

Mounting Facility Quantity

1

Mounting Method

unthreaded hole(s)

Overall Height

3.1 millimeters maximum

Overall Length

11.5 millimeters maximum

Overall Width

8.5 millimeters maximum

Power Rating Per Characteristic

1.0 watts maximum collector power dissipation

Semiconductor Material

silicon

Special Features

junction pattern arrangement: npn

Terminal Type And Quantity

3 uninsulated wire lead

Transfer Ratio

60.0 minimum static forward current transfer ratio, common-emitter and 320.0 maximum static forward current transfer ratio, common-emitter

Voltage Rating In Volts Per Characteristic

180.0 maximum collector to base voltage/static/emitter open and 160.0 maximum collector to emitter voltage/static/base open and 5.0 maximum emitter to base voltage, static, collector open

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0020588

Cross Reference

CAGE Codes

J3814

Hitachi Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

S5316

Hitachi Seisaku Sy0

Non-us manufacturer (nato), other foreign organization or codification bureaus

61993

Kikusui Intl Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

34525

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063025

Questions & Answers

1. What is the FSCG of the NSN 5961-01-214-7045?

   The FSCG of the NSN 5961-01-214-7045 is 5961

2. Does the NSN 5961-01-214-7045 have a Schedule B code assigned?

   Yes, the Schedule B code is 8541500080

3. Does NSN 5961-01-214-7045 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5961-01-214-7045 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5961-01-214-7045 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5961-01-214-7045 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Thu, Aug 15, 1985