NSN 2TC6-2 1/2

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

at pole one actuator position designation, trip-reset actuator function, 0.750 inches nominal body length, single pole type body style, 0.562 inches nominal body width.

NSN 5925-01-142-7773 Datasheet

(NSN) National Stock Number

5925-01-142-7773

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-142-7773

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Sat, Nov 20, 1982

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Body Length

0.750 inches nominal

Body Style

single pole type

Body Width

0.562 inches nominal

Bushing Length

0.250 inches nominal

Center To Center Distance Between Terminals Parallel To Length

0.500 inches nominal

Fragility Factor

moderately rugged

Inclosure Protection Type For Which Designed

corrosion resistant and explosion proof and dusttight and humidity resistant and sandtight and shockproof and vibrationproof

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 push button

Material

plastic case

Mounting Facility Type And Quantity

1 threaded bushing with panel seal

Mounting Surface To Terminal End Distance

1.312 inches nominal

Nominal Thread Size

0.438 inches

Pole Quantity

1

Reset Method

manual

Storage Type

general purpose warehouse

Terminal Type And Quantity

2 tab w/screw

Thread Quantity Per Inch

32

Thread Series Designator

un

Unpackaged Unit Weight

25.0 grams nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

82647

Sensata Technologies, Inc. Div Sensata Attleboro

U.s./canadian manufacturers

81640

Safran Power Usa, Llc

U.s./canadian manufacturers

81205

The Boeing Company Div Defense

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-142-7773?

   The FSCG of the NSN 5925-01-142-7773 is 5925

2. Does the NSN 5925-01-142-7773 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-142-7773 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-142-7773 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-142-7773 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-142-7773 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Sat, Nov 20, 1982