NSN 2TP4-7

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

230.0 ac and 250.0 dc maximum voltage rating in volts, uninclosed inclosure type, 6 screw terminal type and quantity, 0.500 milliamperes resistive dc and 6.000 amperes resistive ac contact load current rating at maximum rated voltage, unable to decode nonpile-up contact arrangement.

NSN 5930-00-821-7407 Datasheet

(NSN) National Stock Number

5930-00-821-7407

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-821-7407

Requires Demilitarization

Yes

(INC) Item Name Code

00406

Date

Mon, Jan 1, 1962

Schedule B Code

8536509035

Contact Load Current Rating At Maximum Rated Voltage

0.500 milliamperes resistive dc and 6.000 amperes resistive ac

Inclosure Type

uninclosed

Maximum Voltage Rating In Volts

230.0 ac and 250.0 dc

Nonpile-Up Contact Arrangement

unable to decode

Terminal Type And Quantity

6 screw

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000406

Cross Reference

CAGE Codes

91929

Honeywell International Inc. Dba Honeyweel Sensing & Controls

U.s./canadian manufacturers

24617

General Motors Corp

U.s./canadian manufacturers

99974

Delco Electronics Corp Delco Systems Opns

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9035

Description

switches, push-button, rated at over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-821-7407?

   The FSCG of the NSN 5930-00-821-7407 is 5930

2. Does the NSN 5930-00-821-7407 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509035

3. Does NSN 5930-00-821-7407 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-821-7407 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-821-7407 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-821-7407 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962