NSN 3-11930PP2

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

2.000 inches nominal inner bearing cone inside diameter, without brakes braking feature for which designed, not included brake drum, not included brake, tapered axle bore type.

NSN 1630-00-075-2003 Datasheet

(NSN) National Stock Number

1630-00-075-2003

(FSG) Federal Supply Group

16 - Aerospace Craft Components and Accessories

(FSC) Federal Supply Classification

1630 - Aircraft Wheel and Brake Systems

(NIIN) National Item Identification Number

00-075-2003

Requires Demilitarization

Yes

(INC) Item Name Code

08405

Date

Sat, Aug 5, 1967

Schedule B Code

8803200060

Axle Bore Type

tapered

Brake Drum

not included

Brake

not included

Braking Feature For Which Designed

without brakes

Inner Bearing Cone Inside Diameter

2.000 inches nominal

Material

aluminum alloy

Outer Bearing Cone Inside Diameter

1.750 inches nominal

Special Features

u/w a-7a acft

Tire Design Type

smooth contour

Tire Size

22x5.5

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0008405

Cross Reference

CAGE Codes

80378

Triumph Aerostructures, Llc Dba Triumph Aerostructures - Vought Integrated Programs Division

U.s./canadian manufacturers

97153

Goodrich Corporation Div Collins Aerospace, Landing Systems (wheels & Brakes)

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

04960

Water Commodity

671 - Aircraft parts, to include test/tool sets and equipment (other than armament systems)

National Motor Freight Classification Item Number

012420

Questions & Answers

1. What is the FSCG of the NSN 1630-00-075-2003?

   The FSCG of the NSN 1630-00-075-2003 is 1630

2. Does the NSN 1630-00-075-2003 have a Schedule B code assigned?

   Yes, the Schedule B code is 8803200060

3. Does NSN 1630-00-075-2003 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 1630-00-075-2003 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 1630-00-075-2003 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 1630-00-075-2003 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Sat, Aug 5, 1967