NSN 3-18388

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

unable to decode center to center distance between mounting facilities parallel to length, unable to decode center to center distance between mounting facilities parallel to width, fully inclosed inclosure type, unable to decode frequency rating, unable to decode input-output phase relationship.

NSN 5950-00-007-9641 Datasheet

(NSN) National Stock Number

5950-00-007-9641

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-007-9641

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Fri, Jul 14, 1972

Winding Operating Voltage

41.7 ac volts single component 1st secondary

Winding Operating Voltage

115 ac volts to 120 ac volts single component single primary

Winding Operating Voltage

157 ac volts single component 2nd secondary

Overall Length

0.24 inches to 0.35 inches

Reliability Indicator

Not established

Center To Center Distance Between Mounting Facilities Parallel To Length

4.2 inches single mounting facility single center group

Overall Height

0.14 inches to 0.285 inches

Center To Center Distance Between Mounting Facilities Parallel To Width

2.4 inches single mounting facility single center group

Overall Width

0.035 inches to 0.08 inches

Mounting Hole Diameter

0.281 inches single group

Output Phase Relationship Input

Three phase to three phase single component

Frequency Rating

400 hertz single component

Mounting Facility Quantity

6 single group

Winding Shielding Method

Internal shield grounded to inclosure and core single component

Inclosure Type

Fully inclosed

Mounting Method

Flange single group and unthreaded hole single group

Winding Function and Quantity

1 primary single component and 2 secondary single component

Winding Operating Current

Up to 2.69 amperes ac single component 2nd secondary

Winding Operating Current

Up to 7.16 amperes ac single component 1st secondary

Winding Power Rating

1.9 kilovolt-amperes single component all secondary

Terminal Type and Quantity

15 tab, solder lug

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

00144

Te Connectivity Networks, Inc. Div Adc Telecommunications Sales, Inc.

U.s./canadian manufacturers

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

80023

Vishay Hirel Systems Llc Div Marshall

U.s./canadian manufacturers

90536

Lockheed Martin Corp Dba Lockheed Martin Div Mst - Eagan

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-007-9641?

   The FSCG of the NSN 5950-00-007-9641 is 5950

2. Does NSN 5950-00-007-9641 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-00-007-9641 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5950-00-007-9641 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-007-9641 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Jul 14, 1972

6. What is the frequency rating of nsn 5950-00-007-9641?

   400 hertz single component

7. What is the frequency rating of nsn 5950-00-007-9641?

   400 hertz single component

8. What is the frequency rating of nsn 5950-00-007-9641?

   400 hertz single component