NSN 3/4NG-150MRC/E/MSS

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

valve number 150, mil-f-20042, flanges end item identification, unable to decode material, rubber coated gre (glass reinforced epoxy) sheet gasket part name assigned by controlling agency, unable to decode surface treatment, pipe size od: 0.75 inch special features.

NSN 5330-01-593-2965 Datasheet

(NSN) National Stock Number

5330-01-593-2965

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-593-2965

Requires Demilitarization

Yes

(INC) Item Name Code

37840

Date

Wed, Apr 6, 2011

End Item Identification

valve number 150, mil-f-20042, flanges

Part Name Assigned By Controlling Agency

rubber coated gre (glass reinforced epoxy) sheet gasket

Material

unable to decode

Special Features

pipe size od: 0.75 inch

Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0037840

Cross Reference

CAGE Codes

0JM95

Gpt Industries, Llc

U.s./canadian manufacturers

1CC97

Huntington Ingalls Incorporated Div Ingalls Shipbuilding

Non-manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5330-01-593-2965?

   The FSCG of the NSN 5330-01-593-2965 is 5330

2. Does NSN 5330-01-593-2965 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5330-01-593-2965 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5330-01-593-2965 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5330-01-593-2965 was assigned to the Federal Catalog?

   It was assigned 15 years ago, on Wed, Apr 6, 2011