NSN 3003385

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

5975-01-554-8015, electrical compon tie down strap.

NSN 5975-01-554-8015 Datasheet

(NSN) National Stock Number

5975-01-554-8015

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-554-8015

Requires Demilitarization

Yes

(INC) Item Name Code

61736

Date

Mon, Aug 20, 2007

Schedule B Code

8710000090

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061736

Cross Reference

CAGE Codes

05573

Barnes Group Inc. Dba Barnes Distribution

Non-manufacturers

1EFH8

General Dynamics Land Systems - Force Protection Inc. Dba Gdls Div Gdls-Fp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

156600

Schedule B & Trade

Schedule B

8710-00-0090

Description

parts of armored fighting vehicles,motorized, whether or not fitted with weapons

End Use

50030 - Military trucks, armored vehicles, etc.

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

89111

(NAICS) North American Industrial Classification System

336992

Questions & Answers

1. What is the FSCG of the NSN 5975-01-554-8015?

   The FSCG of the NSN 5975-01-554-8015 is 5975

2. Does the NSN 5975-01-554-8015 have a Schedule B code assigned?

   Yes, the Schedule B code is 8710000090

3. Does NSN 5975-01-554-8015 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-01-554-8015 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-01-554-8015 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-01-554-8015 was assigned to the Federal Catalog?

   It was assigned 19 years ago, on Mon, Aug 20, 2007