NSN 301P1021A

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

4.000 microfarads single section capacitance value per section, 1.063 inches minimum and 1.313 inches maximum body width, 2.500 inches nominal body height, w/o mtg facilities, terminal(s) on one surface body style, 1.812 inches minimum and 2.188 inches maximum body length.

NSN 5910-01-124-8367 Datasheet

(NSN) National Stock Number

5910-01-124-8367

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-124-8367

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Thu, Jan 14, 1982

Schedule B Code

8532250080

Body Height

2.500 inches nominal

Body Length

1.812 inches minimum and 2.188 inches maximum

Body Style

w/o mtg facilities, terminal(s) on one surface

Body Width

1.063 inches minimum and 1.313 inches maximum

Capacitance Value Per Section

4.000 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.750 inches nominal

Features Provided

hermetically sealed case

Insulation Resistance At Reference Temp

1250.0 megohms

Nonderated Operating Temp

-40.0 celsius minimum and 70.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Power Factor At Reference Temp In Percent

0.010

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Length

0.625 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 standoff, solder stud

Tolerance Range Per Section

-20.00 to 20.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

10026

Csi Technologies, Inc. Dba Csi Technologies Inc

U.s./canadian manufacturers

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

54795

Hi-Rel Capacitors Inc

U.s./canadian manufacturers

54991

Aschbacher & Associates Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-124-8367?

   The FSCG of the NSN 5910-01-124-8367 is 5910

2. Does the NSN 5910-01-124-8367 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-01-124-8367 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-124-8367 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-124-8367 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-124-8367 was assigned to the Federal Catalog?

   It was assigned 44 years ago, on Thu, Jan 14, 1982