NSN 306-0261

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

frequency rating, center to center distance between mounting facilities parallel to width, tinned wire leads features provided, fully inclosed inclosure type, center to center distance between mounting facilities parallel to length.

NSN 5950-01-311-9941 Datasheet

(NSN) National Stock Number

5950-01-311-9941

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-311-9941

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Thu, Dec 7, 1989

Schedule B Code

8548900100

Center To Center Distance Between Mounting Facilities Parallel To Length

Center To Center Distance Between Mounting Facilities Parallel To Width

Features Provided

tinned wire leads

Frequency Rating

Inclosure Type

fully inclosed

Maximum Operating Temp

71.0 celsius

Mounting Method

unable to decode

Overall Height

0.605 inches minimum and 0.625 inches maximum

Overall Length

0.780 inches minimum and 0.800 inches maximum

Overall Width

0.575 inches minimum and 0.595 inches maximum

Primary To Secondary Turn Ratio

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

6 wire lead

Winding Function And Quantity

Winding Shielding Method

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

13030

Lockheed Martin Sippican, Inc. Div Communication Division

U.s./canadian manufacturers

06978

Vernitron Corp Aie Magnetics Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-311-9941?

   The FSCG of the NSN 5950-01-311-9941 is 5950

2. Does the NSN 5950-01-311-9941 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-01-311-9941 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-311-9941 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-311-9941 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-311-9941 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Thu, Dec 7, 1989