NSN 3096394-101

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

antenna, transit case part name assigned by controlling agency, 5895-01-495-9106; defense satellite communications system end item identification.

NSN 5985-01-573-9985 Datasheet

(NSN) National Stock Number

5985-01-573-9985

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-573-9985

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, May 12, 2009

End Item Identification

5895-01-495-9106; defense satellite communications system

Part Name Assigned By Controlling Agency

antenna, transit case

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1883401

Cross Reference

CAGE Codes

91417

L3harris Technologies, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

2Z -

Air Dimension

Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.

National Motor Freight Class Rating

W - Rating variable

Special Handling

6 - Highest sensitivity, category i, aa&e, classified secret

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

59295

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

116030

Questions & Answers

1. What is the FSCG of the NSN 5985-01-573-9985?

   The FSCG of the NSN 5985-01-573-9985 is 5985

2. Does NSN 5985-01-573-9985 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

3. Does NSN 5985-01-573-9985 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5985-01-573-9985 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5985-01-573-9985 was assigned to the Federal Catalog?

   It was assigned 17 years ago, on Tue, May 12, 2009