NSN 30F1584

A metal hook with a hinged point and with a sliding link, ring, bail, or similar locking device, to secure the point to the body in order to close the throat. The body may be designed of a single piece or it may consist of link(s). When desired, the point may be released to swing outward, thereby freeing the engaged item(s). Excludes:hook, release.

w/mtg tabs/flanges, terminals on opposite surfaces body style, 8.690 inches minimum and 8.810 inches maximum body width, 5.560 inches minimum and 5.690 inches maximum body length, 4.130 inches nominal body height, 0.200 microfarads 1st section and 0.600 microfarads 2nd section and 0.200 microfarads 3rd section capacitance value per section.

NSN 5910-01-242-8714 Datasheet

(NSN) National Stock Number

5910-01-242-8714

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-242-8714

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Fri, Oct 17, 1986

Schedule B Code

8532250080

Body Height

4.130 inches nominal

Body Length

5.560 inches minimum and 5.690 inches maximum

Body Style

w/mtg tabs/flanges, terminals on opposite surfaces

Body Width

8.690 inches minimum and 8.810 inches maximum

Capacitance Value Per Section

0.200 microfarads 1st section and 0.600 microfarads 2nd section and 0.200 microfarads 3rd section

Center To Center Distance Between Terminals Parallel To Length

2.060 inches nominal

Center To Center Distance Between Terminals Parallel To Width

1.000 inches minimum and 2.000 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

6.105 inches minimum and 6.145 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

7.980 inches minimum and 8.020 inches maximum

Insulation Resistance At Reference Temp

10000.0 megohms

Mounting Facility Screw Thread Series Designator

unf

Mounting Facility Type And Quantity

8 threaded mounting holes

Nominal Thread Size

0.190 inches

Nonderated Operating Temp

-57.0 celsius minimum and 90.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

15500.0 dc 1st section and 15500.0 dc 2nd section and 31000.0 dc 3rd section

Reliability Indicator

not established

Schematic Diagram Designator

series connected

Section Quantity

3

Terminal Diameter

0.190 inches nominal

Terminal Length

1.290 inches minimum and 1.410 inches maximum

Terminal Type And Quantity

4 standoff, threaded stud

Tolerance Range Per Section

-5.00 to 15.00 percent all sections

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

13058

Sora Power Inc. Dba Sora Power Inc

U.s./canadian manufacturers

01002

General Electric Co Capacitors Div

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-242-8714?

   The FSCG of the NSN 5910-01-242-8714 is 5910

2. Does the NSN 5910-01-242-8714 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-01-242-8714 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-242-8714 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-242-8714 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-242-8714 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Fri, Oct 17, 1986