NSN 310062-1

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.402 inches maximum body width, 2.0 milliwatts nominal drive level rating, 0.150 inches maximum body thickness, antiresonance circuit resonance, 0.192 inches nominal center to center distance between terminals.

NSN 5955-01-293-9991 Datasheet

(NSN) National Stock Number

5955-01-293-9991

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5955 - Oscillators and Piezoelectric Crystals

(NIIN) National Item Identification Number

01-293-9991

Requires Demilitarization

Yes

(INC) Item Name Code

00196

Date

Thu, Feb 9, 1989

Schedule B Code

8541900000

Body Width

0.402 inches maximum

Body Thickness

0.150 inches maximum

Center To Center Distance Between Terminals

0.192 inches nominal

Circuit Resonance

antiresonance

Drive Level Rating

2.0 milliwatts nominal

Equivalent Resistance Value In Ohms

40.0 nominal

Frequency Tolerance For Operating Temp In Percent

-0.005 to 0.005

Load Capacitance In Picofarads

20.0 nominal

Mode Of Oscillation

fundamental

Operating Temp Range

-20.0 to 70.0 celsius

Overall Length

0.530 inches maximum

Overall Thickness

0.183 inches maximum

Overall Width

0.435 inches maximum

Specified Frequency

8.000 megahertz

Style Designator

oval body, wire leads

Terminal Diameter

0.017 inches nominal

Terminal Length

0.787 inches nominal

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0000196

Cross Reference

CAGE Codes

64854

L3 Communications Telemetry-West Div Telemetry-West

U.s./canadian manufacturers

9U244

L3 Technologies, Inc. Dba Telementry & Rf Products Div L3 Technologies, Telemetry & Rf Products

U.s./canadian manufacturers

62712

Seiko Instruments U.s.a. Inc.

U.s./canadian manufacturers

54331

Monitor Products Co. Inc. Dba Monitor Products Co. Inc.

U.s./canadian manufacturers

21821

Cts Valpey Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34525

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063025

Schedule B & Trade

Schedule B

8541-90-0000

Description

diode, transistor & similar semiconductor device parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77688

(NAICS) North American Industrial Classification System

334419

Questions & Answers

1. What is the FSCG of the NSN 5955-01-293-9991?

   The FSCG of the NSN 5955-01-293-9991 is 5955

2. Does the NSN 5955-01-293-9991 have a Schedule B code assigned?

   Yes, the Schedule B code is 8541900000

3. Does NSN 5955-01-293-9991 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5955-01-293-9991 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5955-01-293-9991 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5955-01-293-9991 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Thu, Feb 9, 1989