NSN 313D043-1

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

black color, semirigid flexibility, corrosion resistant and flame resistant and mildew resistant and solvent resistant and water resistant environmental protection, 200.0 volts per mil /0.001 inch/ dielectric material voltage rating per unit thickness, unable to decode distance from bottom of shoulder to large end of main body.

NSN 5970-01-024-1352 Datasheet

(NSN) National Stock Number

5970-01-024-1352

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5970 - Electrical Insulators and Insulating Materials

(NIIN) National Item Identification Number

01-024-1352

Requires Demilitarization

Yes

(INC) Item Name Code

61626

Date

Tue, Jul 6, 1976

Schedule B Code

8546900000

Color

black

Dielectric Material Voltage Rating Per Unit Thickness

200.0 volts per mil /0.001 inch/

Distance From Bottom Of Shoulder To Large End Of Main Body

unable to decode

Environmental Protection

corrosion resistant and flame resistant and mildew resistant and solvent resistant and water resistant

Flexibility

semirigid

Main Body Overall Length

unable to decode

Main Body Small End Inside Diameter

unable to decode

Main Body Large End Inside Diameter

unable to decode

Main Body Wall Thickness

unable to decode

Material Document And Classification

rt-301, raychem corp mfr ref single material response or mpp-262,high voltage engineering corp mfr ref single material response location not otherwise specified

Material

plastic polyolefin location not otherwise specified

Minimum Tensile Strength

1500 pounds per square inch

Special Features

large end has lip 0.120 in. long by 0.040 in. thk,wall thk tapers from large end of main body to 0.045 in. small end of main body

Style Designator

boot-straight-long

Temp Rating

-55.0 celsius

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061626

Cross Reference

CAGE Codes

30609

Secoa Corp

U.s./canadian manufacturers

06090

Te Connectivity Corporation Dba Raychem Product Division

U.s./canadian manufacturers

20999

3m Co Admininistrative Electronic & Communications

U.s./canadian manufacturers

53387

3m Company Dba 3m

U.s./canadian manufacturers

78286

Sikorsky Aircraft Corporation Dba Sikorsky Aircraft Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

53360

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

103300

Schedule B & Trade

Schedule B

8546-90-0000

Description

electrical insulators, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77324

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5970-01-024-1352?

   The FSCG of the NSN 5970-01-024-1352 is 5970

2. Does the NSN 5970-01-024-1352 have a Schedule B code assigned?

   Yes, the Schedule B code is 8546900000

3. Does NSN 5970-01-024-1352 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5970-01-024-1352 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5970-01-024-1352 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5970-01-024-1352 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Tue, Jul 6, 1976