NSN 3145846-2

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

increase contact action stimulus, unable to decode contact load current rating, 141.00 actuation point minimum degrees fahrenheit and 157.00 actuation point maximum degrees fahrenheit and 129.00 deactuation point minimum degrees fahrenheit and 139.00 deactuation point maximum degrees fahrenheit contact stimulus rating, deactuation point not adjustable and actuation point not adjustable contact adjustability, 0.642 inches maximum body diameter.

NSN 5930-01-076-6446 Datasheet

(NSN) National Stock Number

5930-01-076-6446

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-076-6446

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Wed, May 9, 1979

Schedule B Code

9032100000

Body Diameter

0.642 inches maximum

Contact Action Stimulus

increase

Contact Adjustability

deactuation point not adjustable and actuation point not adjustable

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

141.00 actuation point minimum degrees fahrenheit and 157.00 actuation point maximum degrees fahrenheit and 129.00 deactuation point minimum degrees fahrenheit and 139.00 deactuation point maximum degrees fahrenheit

Contact Voltage Rating In Volts

unable to decode

Distance Between Mounting Facility Centers

0.811 inches nominal

End Item Identification

svo control cabinet 56232

Features Provided

electrical access port

Hazardous Locations/Environmental Protection

dusttight

Media For Which Designed

gas

Mounting Facility Pattern

two position in-line

Mounting Method

bracket(s) and unthreaded hole(s)

Nonpile-Up Contact Arrangement

1 pole, single throw, normally open, momentary action

Overall Height

0.515 inches minimum and 0.523 inches maximum

Overall Length

1.090 inches nominal

Temp Sensing Element Type

internal sensor

Terminal Type

tab, solder lug

Unthreaded Mounting Hole Diameter

0.117 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

82647

Sensata Technologies, Inc. Div Sensata Attleboro

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

97896

Honeywell International Inc. Dba Honeywell Div Aerospace ? Redmond Commercial

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-01-076-6446?

   The FSCG of the NSN 5930-01-076-6446 is 5930

2. Does the NSN 5930-01-076-6446 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-01-076-6446 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-076-6446 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-076-6446 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-076-6446 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Wed, May 9, 1979