NSN 3164-018

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

acft eng f-101,servo for housing for fuel control 1270m87p03 end item identification, matl aluminum alloy per ams 4117; 2.023 in. long; 0.8433 in. min and 0.8436 in. max wide general characteristics item description.

NSN 2915-01-182-7076 Datasheet

(NSN) National Stock Number

2915-01-182-7076

(FSG) Federal Supply Group

29 - Engine Accessories

(FSC) Federal Supply Classification

2915 - Aircraft and Missile Prime Movers Engine Fuel System Components

(NIIN) National Item Identification Number

01-182-7076

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Wed, Jun 27, 1984

End Item Identification

acft eng f-101,servo for housing for fuel control 1270m87p03

General Characteristics Item Description

matl aluminum alloy per ams 4117; 2.023 in. long; 0.8433 in. min and 0.8436 in. max wide

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

1414580

Cross Reference

CAGE Codes

66503

Woodward, Inc. Div Fuel Systems and Controls

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

M - 85.0

National Motor Freight Class Rating

W - Rating variable

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

671 - Aircraft parts, to include test/tool sets and equipment (other than armament systems)

National Motor Freight Classification Item Number

133300

Questions & Answers

1. What is the FSCG of the NSN 2915-01-182-7076?

   The FSCG of the NSN 2915-01-182-7076 is 2915

2. Does NSN 2915-01-182-7076 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

3. Does NSN 2915-01-182-7076 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 2915-01-182-7076 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 2915-01-182-7076 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Wed, Jun 27, 1984