NSN 31827175

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

mount, elastomer part name assigned by controlling agency, 3810-01-550-3454 end item identification.

NSN 5340-01-616-9813 Datasheet

(NSN) National Stock Number

5340-01-616-9813

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-616-9813

Requires Demilitarization

Yes

(INC) Item Name Code

53590

Date

Wed, Mar 6, 2013

Schedule B Code

8487900080

End Item Identification

3810-01-550-3454

Part Name Assigned By Controlling Agency

mount, elastomer

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0053590

Cross Reference

CAGE Codes

0MWG9

Hammer & Steel, Inc. Dba Hammer & Steel Inc

Non-manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8487-90-0080

Description

machinery parts not containing electrical features, and not specified or included elsewhere in chapter 84, except ships' propellers

End Use

21180 - Industrial machines, other

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

74999

(NAICS) North American Industrial Classification System

333998

Questions & Answers

1. What is the FSCG of the NSN 5340-01-616-9813?

   The FSCG of the NSN 5340-01-616-9813 is 5340

2. Does the NSN 5340-01-616-9813 have a Schedule B code assigned?

   Yes, the Schedule B code is 8487900080

3. Does NSN 5340-01-616-9813 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-616-9813 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-01-616-9813 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-616-9813 was assigned to the Federal Catalog?

   It was assigned 13 years ago, on Wed, Mar 6, 2013