NSN 32113716

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

test set,electronic equipment end item identification, 7.375 inches nominal overall length, 2 switch and 10 capacitor and 10 resistor component type and quantity.

NSN 6625-00-920-2183 Datasheet

(NSN) National Stock Number

6625-00-920-2183

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-920-2183

Requires Demilitarization

Yes

(INC) Item Name Code

42648

Date

Fri, Jan 1, 1960

Schedule B Code

9030908030

Component Type And Quantity

2 switch and 10 capacitor and 10 resistor

End Item Identification

test set,electronic equipment

Overall Length

7.375 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0042648

Cross Reference

CAGE Codes

20183

Drs Advanced Isr, Llc

U.s./canadian manufacturers

93346

Caes Systems Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-920-2183?

   The FSCG of the NSN 6625-00-920-2183 is 6625

2. Does the NSN 6625-00-920-2183 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-920-2183 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-00-920-2183 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-00-920-2183 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-920-2183 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960