NSN 32303LB

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

5.0 amperes resistive load and 2.0 amperes inductive load ac at sea level contact load current rating, 4120-01-075-4498 end item identification, contact load current rating, 5.0 amperes resistive load and 2.5 amperes inductive load and 2.0 amperes lamp load dc at sea level contact load current rating, breaks before makes first section rear contact switching action.

NSN 5930-01-121-1165 Datasheet

(NSN) National Stock Number

5930-01-121-1165

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-121-1165

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sat, Oct 31, 1981

Schedule B Code

8536509020

End Item Identification

4120-01-075-4498

Contact Load Current Rating

Contact Load Current Rating

5.0 amperes resistive load and 2.5 amperes inductive load and 2.0 amperes lamp load dc at sea level

Contact Load Current Rating

5.0 amperes resistive load and 2.0 amperes inductive load ac at sea level

Contact Switching Action

breaks before makes first section rear

Contact Switching Action

makes before breaks second section rear

Contact Switching Action

makes before breaks third section rear

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Features Provided

actuator knob

First Flat Length

0.438 inches nominal single actuator

Flat Height

0.219 inches nominal single actuator

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

3

Knob Manufacturer Code

82121

Knob Manufacturer Part Number

01500-2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.469 inches single mounting facility

Nonturn Device Type

slotted bushing at 6:00 oclock

Overall Diameter

1.875 inches nominal

Overall Length

2.891 inches nominal

Pole Quantity

1 each section rear

Precious Material And Location

contact surfaces silver

Precious Material

silver

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

0.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.531 inches nominal single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

8 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Positioning Increment

unable to decode

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Actuator Stop Device Type

unable to decode

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Thread Class

2a single mounting facility

Thread Length

0.469 inches nominal single mounting facility

Thread Quantity Per Inch

32 single mounting facility

Thread Series Designator

uns single mounting facility

Throw Quantity

7 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-121-1165?

   The FSCG of the NSN 5930-01-121-1165 is 5930

2. Does the NSN 5930-01-121-1165 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-121-1165 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-121-1165 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-121-1165 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-121-1165 was assigned to the Federal Catalog?

   It was assigned 44 years ago, on Sat, Oct 31, 1981