NSN 3236220

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2520-01-263-2984, driving axle differential.

NSN 2520-01-263-2984 Datasheet

(NSN) National Stock Number

2520-01-263-2984

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2520 - Vehicular Power Transmission Components

(NIIN) National Item Identification Number

01-263-2984

Requires Demilitarization

Yes

(INC) Item Name Code

19207

Date

Sat, Sep 12, 1987

Schedule B Code

8483909500

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0019207

Cross Reference

CAGE Codes

59364

Honeywell International Inc. Dba Honeywell International Div Aerospace - Tempe (west Warner Road)

U.s./canadian manufacturers

99343

Chrysler Corp Engine and Components Sales Diversified Products Div

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08200

Water Commodity

885 - Vehicles, mhe, road construction, repair parts and components

National Motor Freight Classification Item Number

017920

Schedule B & Trade

Schedule B

8483-90-9500

Description

parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts

End Use

21180 - Industrial machines, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

74890

(NAICS) North American Industrial Classification System

333613

Questions & Answers

1. What is the FSCG of the NSN 2520-01-263-2984?

   The FSCG of the NSN 2520-01-263-2984 is 2520

2. Does the NSN 2520-01-263-2984 have a Schedule B code assigned?

   Yes, the Schedule B code is 8483909500

3. Does NSN 2520-01-263-2984 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2520-01-263-2984 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2520-01-263-2984 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2520-01-263-2984 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Sat, Sep 12, 1987