Nut Height: 9/16", Width across flats: 3/4", Thread Size: 1/2", steel overall
Width Across Flats
From 0.738" and 0.752"
Thready Qty Per Inch (tpi)
Nominal Thread Size
Criticality Code Justification
Bearing Surface Type
Material per mil-s-5000 or mil-s-6049; nut has rockwell hardness of c34-c39 in accordance with mil-h-6875 class a; 100% magnetic particle inspection per mil-i-6868 performed by both cir. and long. method, the wet or dry process with either fluor. or non-fluor. shall be used, no cracks allowed; nuts finished per qq-p-416 type ii cl 3; baked at 375 deg f for 23 hours after plating; embrittlement test per qq-p-416 does not apply; surface finished shall be 125 unless otherwise specified
Special Test Features
Items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components. these items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines, and shore stations of the us navy. critical features including, but not limited to, dimensions, tolerances/clearances, electronic characteristics, and metallurgical properties will bespecified for government q ar (quality assurance representatives) to insure the highest possible degree of quality and reliability of these parts being delivered under navicp contracts
Surface Treatment Spec
Qq-p-416,ty 2,cl 3 fed spec single treatment response
Nut, Plain, Slotted, Hexagon, also referenced with federal logistics item name code 01859
- A nut having a flat bearing surface and 6 flat sides with slots in its upper portion. it is designed to provide positive locking when used with a solid or split (cotter) pin. excludes nut (1), plain, castellated, hexagon.
||Nut, Plain, Slotted, He
||Nut, Plain, Slotted, Hex