NSN 324980

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

7040-00-053-1316, tube bearing.

NSN 7040-00-053-1316 Datasheet

(NSN) National Stock Number

7040-00-053-1316

(FSG) Federal Supply Group

70 - Information Technology Equipment (Including Firmware), Software, Supplies and Support Equipment

(FSC) Federal Supply Classification

7040 - Punched Card Equipment

(NIIN) National Item Identification Number

00-053-1316

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Sat, May 20, 1967

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

1640490

Cross Reference

CAGE Codes

12344

Tally Printer Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

738 - Computing equipment, computer components, and circuit cards

National Motor Freight Classification Item Number

133300

Questions & Answers

1. What is the FSCG of the NSN 7040-00-053-1316?

   The FSCG of the NSN 7040-00-053-1316 is 7040

2. Does NSN 7040-00-053-1316 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 7040-00-053-1316 contain precious materials?

   Precious metal content is unknown

4. Does NSN 7040-00-053-1316 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 7040-00-053-1316 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Sat, May 20, 1967