NSN 3255392-2

A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes:washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.

25.000 continuous current rating in amps, normal instantaneous circuit over-current interruption type, pigtail type body style, nonrenewable fusible element features provided, opaque body interruption indicator method.

NSN 5920-01-273-7923 Datasheet

(NSN) National Stock Number

5920-01-273-7923

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

01-273-7923

Requires Demilitarization

Yes

(INC) Item Name Code

00248

Date

Tue, Mar 1, 1988

Body Style

pigtail type

Circuit Over-Current Interruption Type

normal instantaneous

Continuous Current Rating In Amps

25.000

Features Provided

nonrenewable fusible element

Interruption Indicator Method

opaque body

Material

copper terminal

Maximum Voltage Rating In Volts

32.0 dc

Overall Diameter

0.133 inches nominal

Overall Length

0.312 inches nominal

Surface Treatment

unable to decode

Terminal Diameter

0.040 inches nominal

Terminal Length

1.500 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000248

Cross Reference

CAGE Codes

75915

Littelfuse, Inc.

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

13226

Betts Industries, Inc.

U.s./canadian manufacturers

34280

Wavetek Rf Products, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34740

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062060

Questions & Answers

1. What is the FSCG of the NSN 5920-01-273-7923?

   The FSCG of the NSN 5920-01-273-7923 is 5920

2. Does NSN 5920-01-273-7923 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5920-01-273-7923 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5920-01-273-7923 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5920-01-273-7923 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Tue, Mar 1, 1988