NSN 32A8FT2T

A washer of nonresilient material usually having two parallel bearing surfaces. The outside and/or inside edges have one or more protuberances. The ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. The keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. Excludes:thrust type washer.

1.873 inches minimum and 1.875 inches maximum center hole diameter, unable to decode joint type, unable to decode material document and classification, 0.108 inches minimum and 0.118 inches maximum cross-sectional height, square/rectangular cross-sectional shape style.

NSN 5330-00-780-4353 Datasheet

(NSN) National Stock Number

5330-00-780-4353

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-780-4353

Requires Demilitarization

Yes

(INC) Item Name Code

04521

Date

Fri, Mar 15, 1968

Schedule B Code

3926904500

Center Hole Diameter

1.873 inches minimum and 1.875 inches maximum

Cross-Sectional Height

0.108 inches minimum and 0.118 inches maximum

Cross-Sectional Shape Style

square/rectangular

Joint Type

unable to decode

Material Document And Classification

unable to decode

Peripheral Diameter

2.127 inches minimum and 2.129 inches maximum

Material

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004521

Cross Reference

CAGE Codes

5F573

Greene Tweed & Co Inc

U.s./canadian manufacturers

72902

Palmetto Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-00-780-4353?

   The FSCG of the NSN 5330-00-780-4353 is 5330

2. Does the NSN 5330-00-780-4353 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5330-00-780-4353 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-00-780-4353 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5330-00-780-4353 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-00-780-4353 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, Mar 15, 1968