NSN 32D6880

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

3.000 inches nominal body diameter, 3.375 inches nominal body length, aluminum capacitive electrode material, etched foil anode type, w/o mtg facilities, terminal(s) on one end body style.

NSN 5910-00-054-0400 Datasheet

(NSN) National Stock Number

5910-00-054-0400

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-054-0400

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Sun, Jan 1, 1961

Schedule B Code

8532290040

Anode Type

etched foil

Body Diameter

3.000 inches nominal

Body Length

3.375 inches nominal

Body Style

w/o mtg facilities, terminal(s) on one end

Capacitive Electrode Material

aluminum

Capacitance Value Per Section

3500.000 microfarads single section

Center To Center Distance Between Terminals Parallel To Diameter

1.000 inches nominal

Dc Leakage At Reference Temp

6.000 milliamperes

Electrical Polarization

polarized

Features Provided

hermetically sealed case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Power Factor At Reference Temp In Percent

35.0000

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Length

0.875 inches nominal

Terminal Surface Treatment

copper

Terminal Type And Quantity

2 solder stud

Tolerance Range Per Section

-10.00 to 100.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

37942

Yosemite Investment Inc Dba North American Capacitor Co

U.s./canadian manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

90201

Mallory Sonalert Products, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-054-0400?

   The FSCG of the NSN 5910-00-054-0400 is 5910

2. Does the NSN 5910-00-054-0400 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-054-0400 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-054-0400 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-054-0400 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-054-0400 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961