NSN 3315914

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.

115.0 ac at sea level contact voltage rating in volts, 28.0 dc at sea level contact voltage rating in volts, breaks before makes each section rear contact switching action, 100.0 milliamperes resistive load ac at sea level contact load current rating, 100.0 milliamperes resistive load and 50.0 milliamperes inductive load dc at sea level contact load current rating.

NSN 5930-01-170-0036 Datasheet

(NSN) National Stock Number

5930-01-170-0036

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-170-0036

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, Jan 18, 1984

Schedule B Code

8536509020

Contact Load Current Rating

100.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

100.0 milliamperes resistive load and 50.0 milliamperes inductive load dc at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.240 inches minimum and 0.260 inches maximum single actuator

Flat Height

0.211 inches minimum and 0.221 inches maximum single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

4

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.422 inches minimum and 0.442 inches maximum at 3:00 oclock

Nonturn Device Type

tab at 3:00 oclock

Operating Temp Range

-40.0 to 85.0 celsius

Overall Diameter

1.103 inches maximum

Overall Length

3.124 inches minimum and 3.204 inches maximum

Pole Quantity

1 each section front

Precious Material And Location

contacts silver

Precious Material

silver

Rotor Through Connection Quantity

1 each section

Shaft Diameter

0.248 inches minimum and 0.252 inches maximum single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.417 inches minimum and 0.457 inches maximum single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

7 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.417 inches minimum and 0.457 inches maximum single mounting facility

Thread Series Designator

unf single mounting facility

Throw Quantity

7 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

77068

Allied-Signal Inc Dba Allied-Signal Aerospace Co Electrodynamics Div

U.s./canadian manufacturers

91812

Janco Corporation Dba Janco Corp Div Mason Controls

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-170-0036?

   The FSCG of the NSN 5930-01-170-0036 is 5930

2. Does the NSN 5930-01-170-0036 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-170-0036 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-170-0036 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-170-0036 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-170-0036 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Wed, Jan 18, 1984