NSN 332CM

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

friction knuckle type, 1 knuckle quantity, 1.719 inches nominal body width, 0.083 inches nominal material thickness, heavy duty performance type.

NSN 5340-00-126-7465 Datasheet

(NSN) National Stock Number

5340-00-126-7465

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-126-7465

Requires Demilitarization

Yes

(INC) Item Name Code

22894

Date

Sat, Mar 1, 1975

Body Width

1.719 inches nominal

Knuckle Quantity

1

Knuckle Type

friction

Material Thickness

0.083 inches nominal

Performance Type

heavy duty

Pin Center To Body Edge Distance

0.750 inches nominal

Pin Removability

nonremovable

Material

unable to decode

Mounting Hole Diameter

0.144 inches nominal

Reversible Feature

not included

Style Designator

butt

Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0022894

Cross Reference

CAGE Codes

57068

Stanley Works the

Non-manufacturers

6ZGH6

Stanley Black & Decker, Inc.

Non-manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5340-00-126-7465?

   The FSCG of the NSN 5340-00-126-7465 is 5340

2. Does NSN 5340-00-126-7465 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-126-7465 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-126-7465 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-126-7465 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Sat, Mar 1, 1975