NSN 335455

A switch which is externally actuated by a lever and whose contacts open and close with an instantaneous (snap) action; includes items having one or more momentary positions. Includes switches (snap action) which use mercury to bridge contacts, and assemblages of complete switches (snap action) having common actuators. Excludes:switch,lever; switch,rotary; switch,knife; switch,sensitive; and switch,box.

breaks before makes each section rear contact switching action, 250.0 milliamperes resistive load ac at sea level contact load current rating, 3.5 amperes resistive load dc at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts, breaks before makes second section front contact switching action.

NSN 5930-00-908-9687 Datasheet

(NSN) National Stock Number

5930-00-908-9687

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-908-9687

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Jan 1, 1960

Schedule B Code

8536509020

Contact Load Current Rating

250.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

3.5 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes each section rear

Contact Switching Action

breaks before makes second section front

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

12.0 dc at sea level

Features Provided

variable resistor

First Flat Length

0.250 inches nominal second actuator

First Flat Length

0.375 inches nominal first actuator

Flat Height

0.156 inches nominal second actuator

Flat Height

0.234 inches nominal first actuator

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.438 inches nominal at 3:00 oclock

Nonturn Device Type

tab at 3:00 oclock

Overall Height

1.500 inches maximum

Overall Length

2.939 inches nominal

Overall Width

1.296 inches minimum and 1.328 inches maximum

Pole Quantity

1 second section front

Pole Quantity

2 each section rear

Precious Material And Location

contacts and rotor blades surface silver

Precious Material

silver

Shaft Diameter

0.265 inches nominal first actuator

Shaft Flat/Slot Angular Location

300.0 degrees from nonturn device second actuator

Shaft Flat/Slot Angular Location

30.0 degrees from nonturn device first actuator

Shaft Diameter

0.187 inches nominal second actuator

Shaft Type

round, flatted second actuator

Shaft Type

round, hollowed, flatted first actuator

Shaft Length

0.438 inches nominal first actuator

Shaft Length

0.751 inches nominal second actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

5 first actuator

Switch Actuator Positioning Increment

30.0 degrees first actuator

Switch Actuator Stop Device Type

fixed stop first actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

4 second section front

Throw Quantity

4 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

51734

Elmec Industries

U.s./canadian manufacturers

71590

Crl Components Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-908-9687?

   The FSCG of the NSN 5930-00-908-9687 is 5930

2. Does the NSN 5930-00-908-9687 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-908-9687 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-908-9687 contain precious materials?

   Item contains silver.

5. Does NSN 5930-00-908-9687 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-908-9687 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960