NSN 342A9599

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

20.0 fahrenheit and 240.0 fahrenheit precalibrated temp marking.

NSN 6685-01-393-0246 Datasheet

(NSN) National Stock Number

6685-01-393-0246

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6685 - Humidity Measuring and Controlling Instruments, Temperature and Pressure

(NIIN) National Item Identification Number

01-393-0246

Requires Demilitarization

Yes

(INC) Item Name Code

33785

Date

Wed, Jul 13, 1994

Schedule B Code

9025198080

Precalibrated Temp Marking

20.0 fahrenheit and 240.0 fahrenheit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0033785

Cross Reference

CAGE Codes

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

82682

Tempil, Inc. Dba Tempil, Inc.

U.s./canadian manufacturers

89954

Bae Systems Controls Inc.

U.s./canadian manufacturers

07482

General Electric Company

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

652 - Instruments, scientific

National Motor Freight Classification Item Number

133300

Schedule B & Trade

Schedule B

9025-19-8080

Description

thermometers, not combined with other instruments, nesoi

End Use

21610 - Medicinal equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87455

(NAICS) North American Industrial Classification System

334513

Questions & Answers

1. What is the FSCG of the NSN 6685-01-393-0246?

   The FSCG of the NSN 6685-01-393-0246 is 6685

2. Does the NSN 6685-01-393-0246 have a Schedule B code assigned?

   Yes, the Schedule B code is 9025198080

3. Does NSN 6685-01-393-0246 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6685-01-393-0246 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6685-01-393-0246 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6685-01-393-0246 was assigned to the Federal Catalog?

   It was assigned 32 years ago, on Wed, Jul 13, 1994