NSN 3516797-2

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

f-15 end item identification, qq-b-613, comp 1, 1/2 hard fed spec single material response material document and classification, 0.077 inches minimum and 0.083 inches maximum diameter, copper alloy 360 material, fine tool machined surface finish.

NSN 5340-01-245-7141 Datasheet

(NSN) National Stock Number

5340-01-245-7141

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-245-7141

Requires Demilitarization

Yes

(INC) Item Name Code

16584

Date

Wed, Dec 3, 1986

End Item Identification

f-15

Diameter

0.077 inches minimum and 0.083 inches maximum

Machined Surface Finish

fine tool

Material Document And Classification

qq-b-613, comp 1, 1/2 hard fed spec single material response

Material

copper alloy 360

Surface Treatment

copper

Thickness

0.008 inches minimum and 0.012 inches maximum

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016584

Cross Reference

CAGE Codes

82577

Raytheon Company Dba Raytheon

Non-manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-245-7141?

   The FSCG of the NSN 5340-01-245-7141 is 5340

2. Does NSN 5340-01-245-7141 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

3. Does NSN 5340-01-245-7141 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-245-7141 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-245-7141 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Wed, Dec 3, 1986