NSN 357-S

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.937 inches nominal overall length, unable to decode end type, unable to decode item accommodated trade size, iron malleable or steel material, unable to decode conduit type accommodated.

NSN 5975-00-423-6709 Datasheet

(NSN) National Stock Number

5975-00-423-6709

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

00-423-6709

Requires Demilitarization

Yes

(INC) Item Name Code

06935

Date

Tue, Jan 1, 1963

Schedule B Code

8543909000

Conduit Type Accommodated

unable to decode

End Type

unable to decode

Item Accommodated Trade Size

unable to decode

Material

iron malleable or steel

Overall Length

0.937 inches nominal

Style Designator

thread to thread reducer

Supplementary Features

end item b-1 aircraft support equipment

Surface Treatment

cadmium or zinc

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006935

Cross Reference

CAGE Codes

65597

"thales Usa, Inc. Div Air Mobility Solutions ("ams")"

U.s./canadian manufacturers

64415

Leonardo Us Cyber and Security Solutions, Llc

U.s./canadian manufacturers

33342

Atlas Technologies Inc

U.s./canadian manufacturers

58536

Federal Commercial Item Description Promulgated by General Services Administration Washington Dc

Military standards and standards organizations (ex:stanags,milspecs,defstans)

56501

Abb Installation Products Inc

U.s./canadian manufacturers

83879

Egs Electric Co Llc

U.s./canadian manufacturers

03743

Egs Electrical Group Appleton Div

U.s./canadian manufacturers

49367

Amphenol Corporation Dba Amphenol Aerospace Industrial Div Amphenol Aerospace/pyle National

U.s./canadian manufacturers

77774

Crouse-Hinds Lighting

U.s./canadian manufacturers

15235

Crouse-Hinds Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34496

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062010

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-00-423-6709?

   The FSCG of the NSN 5975-00-423-6709 is 5975

2. Does the NSN 5975-00-423-6709 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-00-423-6709 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-00-423-6709 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-00-423-6709 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-00-423-6709 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963