NSN 358934

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

250.0 highest ac voltage rating at sea level contact voltage rating in volts, 2.0 amperes resistive load lowest ac voltage rating at sea level contact load current rating, 0.828 inches nominal single actuator first flat length, 125.0 lowest ac voltage rating at sea level contact voltage rating in volts, 1.0 amperes resistive load highest ac voltage rating at sea level contact load current rating.

NSN 5930-01-161-3085 Datasheet

(NSN) National Stock Number

5930-01-161-3085

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-161-3085

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sun, Sep 4, 1983

Schedule B Code

8536509020

Contact Load Current Rating

1.0 amperes resistive load highest ac voltage rating at sea level

Contact Load Current Rating

2.0 amperes resistive load lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

125.0 lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

250.0 highest ac voltage rating at sea level

First Flat Length

0.828 inches nominal single actuator

Flat Height

0.203 inches nominal single actuator

Individual Section Quantity

1

Mounting Method

bracket(s) and unthreaded hole(s) single mounting facility

Overall Height

1.281 inches nominal

Overall Length

1.547 inches nominal

Overall Width

2.438 inches nominal

Pole Quantity

2 single section rear

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.938 inches nominal single actuator

Style Designator

rectangular panel mount

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

quick disconnect, male

Throw Quantity

2 single section rear

Unthreaded Mounting Hole Diameter

0.156 inches nominal single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81306

Whirlpool Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-161-3085?

   The FSCG of the NSN 5930-01-161-3085 is 5930

2. Does the NSN 5930-01-161-3085 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-161-3085 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-161-3085 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-161-3085 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-161-3085 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Sun, Sep 4, 1983