NSN 367125-2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

3.465 inches overall width, gear 42 teeth diametral pitch 20 pressure angle 20 deg root dia 1.951 nom special features, ambient air and oil cooling method, pins d, a: output 16 volts, single phase frequency 541 hz; 6.0 amps at 5410rpm; 15 second duty cycle. pins h, a: output 98 volts, single phase frequency 3608 hz; 13.0 amps at 36000 rpm; continuous duty supplementary features.

NSN 6115-01-036-6368 Datasheet

(NSN) National Stock Number

6115-01-036-6368

(FSG) Federal Supply Group

61 - Electric Wire, and Power and Distribution Equipment

(FSC) Federal Supply Classification

6115 - Electrical Generators and Generator Sets

(NIIN) National Item Identification Number

01-036-6368

Requires Demilitarization

Yes

(INC) Item Name Code

00781

Date

Sat, Mar 5, 1977

Cooling Method

ambient air and oil

Overall Width

3.465 inches

Special Features

gear 42 teeth diametral pitch 20 pressure angle 20 deg root dia 1.951 nom

Supplementary Features

pins d, a: output 16 volts, single phase frequency 541 hz; 6.0 amps at 5410rpm; 15 second duty cycle. pins h, a: output 98 volts, single phase frequency 3608 hz; 13.0 amps at 36000 rpm; continuous duty

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0000781

Cross Reference

CAGE Codes

99193

Honeywell International Inc. Dba Honeywell International Div Aerospace - Phoenix

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34760

Water Commodity

590 - Generators and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

062120

Questions & Answers

1. What is the FSCG of the NSN 6115-01-036-6368?

   The FSCG of the NSN 6115-01-036-6368 is 6115

2. Does NSN 6115-01-036-6368 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

3. Does NSN 6115-01-036-6368 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6115-01-036-6368 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 6115-01-036-6368 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sat, Mar 5, 1977